How do you light a propane stove?
Manual Lighting
- Turn the propane on that runs to the stove. Raise the stove top.
- Locate the spot for the pilot light.
- Push the control in that says pilot light and hold a lit match over the pilot light hole.
- Hold the control in for 30 to 45 seconds once lit to assure that the pilot light stays lit.
Do you light a propane stove?
Propane will start flowing immediately (if using a built in lighter on the stove, start pressing it as soon as you press the knob). The burner should light immediately. Make sure the burner stays lit and then you can turn it to the desired setting.
Why isn’t my Coleman stove lighting?
Make sure the fuel tank is at least half full before lighting the stove. Let the stove sit for 24 hours then shake the tank and pour out the alcohol. Rinse the tank with clean Coleman Fuel and refill with fresh fuel. If the stove’s burner still pulsates or will not light, you will need to replace the fuel and air tube.
What do you do when the pilot light goes out on the stove?
Relighting your pilot light – here’s how to do it:
- Gear up. Get a microfiber cloth and a lighter or match; a long-wand lighter is best.
- Shut down.
- Remove the grates.
- Open up the stovetop.
- Find the pilot port.
- Clean the pilot light area.
- Light the pilot light.
- Close it up.
How do I troubleshoot my Coleman stove?
Troubleshooting:
- First, make sure you have fuel in the tank and that it is fresh.
- If you stored your tank with fuel, empty the tank and dispose of the old fuel properly and refill the tank with fresh Coleman fuel.
- Next, inspect the rubber washer on the tank fill cap to make sure it is not badly compressed.
How do you date a Coleman 425 Stove?
Two and three-burner stoves usually have two date marks: one on the case and one on the tank. The case marking is usually on the bottom and obvious. To see when the tank was manufactured, turn it upside-down and look at the underside of the mounting tabs. These date stamps follow the month-left and year-right format.
