When was the singer stylist 513 made?
The Stylist 513 was made by the Singer Company in the early 1970’s. The Stylist zig-zag sewing machine featured all the basic capabilities, such as straight and zig-zag stitching, and also had a stitch regulator dial for adjusting stitches and tension.
What is the difference between a Singer 600 and 600e?
“Auto Reel” is what Singer called their new 600 Slant-o-Matic before someone thought up the name “Touch & Sew.” In fact the only difference between the earliest 600 Touch & Sew and the 600 Auto Reel is a new nameplate and a couple of rivets.
How do you wind a bobbin on a Singer Touch and Sew?
How to Thread a Bobbin on a Singer Touch & Sew Machine
- Slide the slide plate located beneath the needle toward you to open it.
- Raise the presser foot, and raise the needle to the highest point.
- Push the bobbin button to the left to move the bobbin into winding position.
- Close the slide plate to release the wind button.
How do you adjust the bobbin tension on a singer simple?
Place a small screwdriver on the head of the screw on the side of the bobbin case. Turn very slightly clockwise to increase the tension on the Singer bobbin. Turn slightly counterclockwise to decrease the bobbin tension.
Can old sewing machines be fixed?
Answer: Luckily, most companies that repair sewing machines work on models from the ’50s and ’60s. Closest to your home is Sun Sew Vac in Alexandria (703-780-0400; www.sunsewvac.com). Or if you decide not to get the machines repaired, you can apply the money to the purchase of a new machine.
When did the singer stylist 513 sewing machine come out?
How to identify a Singer sewing machine model?
The following photos are provided as an aid in identifying common vintage Singer sewing machine models. NOTE – For those images with dotted lines under – clicking the image will transfer to another page with more details of that model.
What are the features of a stylist sewing machine?
The Stylist zig-zag sewing machine featured all the basic capabilities, such as straight and zig-zag stitching, and also had a stitch regulator dial for adjusting stitches and tension. The bobbins used in the machine were clear and the selling point on those were that you could see the thread amount before sewing.
How do you change the needle on a sewing machine?
Grasp the handle and turn toward you, then pull down when the needle is loose. Insert the new needle with the flat side pointing to the back, and push it up as far as it will go. Tighten the needle-clamp down to secure the needle. Turn off the sewing machine. Turn the handwheel toward you to raise the needle to its highest position.
The Stylist 513 was made by the Singer Company in the early 1970’s. The Stylist zig-zag sewing machine featured all the basic capabilities, such as straight and zig-zag stitching, and also had a stitch regulator dial for adjusting stitches and tension.
The following photos are provided as an aid in identifying common vintage Singer sewing machine models. NOTE – For those images with dotted lines under – clicking the image will transfer to another page with more details of that model.
Where can I find the model number of my sewing machine?
Underneath the machine, 2 letters followed by 6 numbers. Model number will be on the front or side of your machine. Check large sites like ebay and etsy, or smaller sites like collector’s weekly. Ideally you will find an exact match, but in case you don’t, find another machine with a similar year and model #.
Is the Singer Sewing Company a reliable company?
Singer Sewing Company does not warrant or guarantee any particular result or the accuracy or reliability of any services, provided by any third parties referenced herein.
