Is Sligh clock company still in business?

Sligh products were made in Holland, Michigan and were the highest quality contemporary clocks made in the USA. Sligh ceased all clock manufacturing in 2005, but they remain a high end manufacturer of furniture products. All Sligh mantle and wall clocks are repaired in our national service center location.

Does Sligh still make grandfather clocks?

Sligh ceased all clock manufacturing in 2005, but they remain a high end manufacturer of furniture products. All Sligh mantle and wall clocks are repaired in our national service center location. We have service technicians in the following areas who make house calls for your Sligh grandfather or floor clock.

Why does my grandfather clock not chime anymore?

What if my mechanical clocks will not chime or strike? Make sure that the strike on/off lever is not in the “strike off” position or halfway between positions. Make sure that the movement is not in the “night off” position. Make sure that all the packing material is removed from the movement area.

How do I reset the chimes on my grandfather clock?

Grandfather clock chimes wrong hour?

Wait for the next hour count on your grandfather clock.
Count the number of hours the grandfather clock chimes.
With your finger, move only the hour hand (the short one) to the number of the hour count.
Reset the time on the grandfather clock to the correct time.

Can you turn the chimes off on a grandfather clock?

You can reach into the clock case and stop the clock’s pendulum from swinging. Many clocks have a lever that can be moved to a “Don’t Chime” position, specifically so that the chiming function can be switched off.

Where are trend grandfather clocks made?

Holland, Michigan
What You Should Know About Sligh Grandfather Clocks. A Sligh grandfather clock represents a brand of fine furniture that was made from 1968 to 2005 in Holland, Michigan.

How do you sync a chimes grandfather clock?

When your mantel clock chimes, count the number of times it chimes. Move the hour hand to the hour indicated by the hourly chime (count the number of gongs at the hour). Reset the time using the minute hand to the correct hour and the chime should adjust along with the clock hands as well.

Why does my grandfather clock chime every 15 minutes?

In the majority of cases, a grandfather clock plays a part of the entire melody as a chime every 15 minutes in an hour. There is no need to move the hour hand, as it will automatically move with the minute hand. Use a cell phone time reading for a precise setting.

How do I quiet my clock chimes?

If you want to make the chime softer, move the chime rod assembly slightly off the sound board. When I set up new GF clocks I usually get the request to soften the sound. If you slightly loosen the mounting screws on the chime block if will be softer. Keep adjusting the screw until you get what you want.

If you have three weights on your grandfather clock and the weights are not moving, the clock is not going to chime or keep time. If your grandfather clock doesn’t have a chime on /off selector on the dial, look just below the dial for a rod hanging down which you may push up or pull down to start the chimes.

How do you reset a Sligh grandfather clock?

To set your Grandfather clock, move the minute hand counter clockwise, the chimes should not play. If for some reason the chimes should begin to play when setting the clock, pause until they complete themselves before continuing. Wait until chimes stop, and turn the minute hand counter clockwise to the desired time .

When did Sligh go out of business?

The family-owned company, founded in 1880, said it will keep its headquarters here but close the plant in September, eliminating 75 jobs. Sligh closed its plant in Zeeland, Mich., in 2002.

Are Sligh Clocks good?

Sligh floor clocks have long been regarded as keeping accurate time as well as having excellent cabinetry. Reputation is important when purchasing a grandfather clock, which is one reason that Sligh is a good choice.

Are Sligh clocks good?

How do I speed up the chimes on my grandfather clock?

To slow the Grandfather Clock down, move the pendulum disk down by turning the adjustment nut to the left. To speed the Grandfather Clock up, move the pendulum disk up by turning the adjustment nut to the right.

How do you manually lower weights on a grandfather clock?

Using cloth gloves, or at least a cloth of some kind, pull down on the weight some. This is the same as making the weight weigh more. At the same time, turn the minute hand past the quarter hour to see if it will engage the chime. When you advance the time and make it chime, the weight will slowly come down.

How do I fix the chimes on my Howard Miller grandfather clock?

How to Reset My Chiming Clock

Place one forefinger gently on the minute hand and push it lightly over to the number 12. Your clock will now naturally emit a series of chimes.
Move the hour hand very gently to this number on the clock face.
Push the minute hand around the clock until the clock displays the actual time.

When did Sligh stop making clocks?

2005
The Sligh Furniture Company began making clocks with through acquiring the Trend Clock Company in 1968 and made fine clocks until 2005 when the division was sold. The rest of the Sligh Furniture was acquired in 2011 by Lexington Home Brands, they still use the Sligh name as a brand.

How to set up a Sligh grandfather clock?

Hang Pendulum coating which should be removed. Carefully hanger as diagrammed (Fig. 8). which may cause the delicate suspension spring to break. 7. Hang Weights to the top of each weight prior to hanging. to pulleys, or in some clocks, chains. Weights and C (Center). Place weights onto the left, the clock front (Fig. 9). Some models will have

Why is my grandfather clock not working after a move?

When the grandfather clock is not working after a move, there are a few problems to look for that can be easily fixed. 1) Examine the dial on the grandfather clock and check to make sure the hands are not touching or hanging on any parts of the dial or second hand. 2) Check the leveling of the grandfather clock.

When does pendulum go out of beat on Sligh grandfather clock?

As pendulum slows down automatically adjust to the proper beat. The Tick—Tick. If the sound is uneven, the beat is out of adjustment. Stop pendulum and restart the swing. If the beat is improved, but not yet to the other side of the case. The movement will go out of beat if the clock is not level. 9. Set Time are playing. play.

What do the numbers on a grandfather clock mean?

The numbers are then followed by a couple of letters such as an AN or SO. These letters signify the finish on the clock such as Andover Cherry or Scrubbed Oak. So a complete Model number would look like 0824-1-AN (The Tennyson) or a 0929-4-SO (The Expedition).

When did Sligh Clock Company stop making grandfather clocks?

For you, the tradition begins the moment you become a Sligh owner. We have sold out of most of the Sligh grandfather clocks, BUT, when the Bulova Clock Company bought the Sligh Clock Company in 2005, they elected to continue making many of the same clocks.

When did Bulova sell the rights to Sligh grandfather clocks?

We have sold out of most of the Sligh grandfather clocks, BUT, when the Bulova Clock Company bought the Sligh Clock Company in 2005, they elected to continue making many of the same clocks. AND then Bulova, in 2007, sold their rights to the Sligh Grandfather clock designs to Hermle who was already making the movements for the clocks.