How much is a birdseye maple tree worth?
The average selling price of a bird’s-eye maple log is in the range of $20,000 to $30,000 per 1,000 board feet.
How hard is birdseye maple?
Birdseye Maple Avg Dry Wgt (?): 45 lbs/ft3 (720 kg/m3) | Janka Hardness (?): 1450lbf (6450 N) | Specific Gravity (?): 0.72.
Is my maple tree worth money?
If you have hard maple, and they are big and straight, then you have a valuable tree, and would be getting probably $125 or likely more per decent tree from sawmill.
How do you recognize curly maple tree?
Look at the exterior of the tree. It should be a mature tree, since young trees do not exhibit signs of the unusual grain. The bark on a curly maple will be slightly bumpier than a regular sugar maple. It is generally gray to dark brown and quite thick.
How much is a hard maple tree worth?
Soft maple is not used in flooring or cabinets much. Therefore, it doesn’t sell for as much. Generally, we apply about 25 to 35 cents. As stated above, sugar or hard maple is more valuable selling for ten to eighty cents per board foot, depending on current markets and the quality.
Is birdseye maple expensive?
Uses. Bird’s eye maple may be expensive, up to several times the cost of ordinary hardwood. When working with bird’s eye wood, it is advisable to take care in what tools are used, so as to prevent grain tearout. Also the more “eyes” there are in lumber, the weaker the wood tends to be.
What makes a Birdeye Maple a birdseye maple?
Birdseye Maple is another title which does not, necessarily, denote a specific Acer species — although the bulk of what is sold is Sugar Maple (Acer Saccharum) — but, rather, a unique figuring that occurs in maple as a result of numerous small- to medium-sized knots accumulating in the wood.
Can a quarter sawn Maple have a birdseye figure?
Birdseye figure is still visible in quarter sawn maple. However, the eyes are open in the flat-sawn direction. They are visible but obscured in the quartersawn direction. It’s similar to looking at the front of a coin as opposed to its edge. To maximize Birdseye figure, maple logs should be cut flatsawn or plainsawn.
Can you cut un selected Maple with birdseye?
There are no Birdseye restrictions in Un-selected Maple or Sap Maple cutting units. However, it is specifically excluded from the cuttings in Piano Action Grade maple. Here is the text:
Where can I buy birds eye maple lumber?
However, bird’s eye is not typically found in traditional lumber stores or big box stores with hardwoods. Accordingly, specialty lumber suppliers like us, Cook Woods or Gilmer are good places to find highly figure maple boards. There are 3 primary issues facing birdseye buyers.
Birdseye Maple is another title which does not, necessarily, denote a specific Acer species — although the bulk of what is sold is Sugar Maple (Acer Saccharum) — but, rather, a unique figuring that occurs in maple as a result of numerous small- to medium-sized knots accumulating in the wood.
What are some common uses for Birdseye wood?
Common Uses: Veneer, furniture, cabinetry, guitar building, and decorative and trim uses. Comments: There can be very large variances in birdseye size and content.
What do birdseyes look like on sanded wood?
When sanded and finish-sanded, boards featuring somewhat larger birdseyes can have an almost 3D look — like brown bumps, sitting up on a light golden surface. There have been tearout issues associated with birdseyes, as sometimes these tiny knots can wind up leaving tiny voids.
How to get a free antique appraisal on Amazon?
If playback doesn’t begin shortly, try restarting your device. An error occurred while retrieving sharing information. Please try again later. Get a Free Antique Appraisal! Click to learn more! latest InstAppraisal Points Challenge! Each win earns a $25 Amazon.com Gift Card! Click here to find out more about InstAppraisal Points!