How do you modernize old drawers?

How do you modernize old drawers?

  1. Step 1: Remove Hardware. Modern Painted Dresser.
  2. Step 2: Remove Old Finish. Modern Painted Dresser.
  3. Step 3: Create Design With Tape. Modern Painted Dresser.
  4. Step 4: Cut Away Gaps for Dresser. Modern Painted Dresser.
  5. Step 5: Add Tape to Drawer Edges.
  6. Step 6: Paint.
  7. Step 7: Remove Tape.
  8. Step 8: Seal Exposed Wood.

How much does it cost to have antique furniture refinished?

Furniture Refinishing Costs The average homeowner pays $619 or between $330 and $908 to refinish a piece of furniture. Depending on the type of item and its condition, that price can be as low as $100 or over $1,000. Some projects for large objects like a dresser in poor condition can even go up to $2,000.

Can you refinish just the top of a dresser?

Since I buy a lot of furniture on Craigslist, this is an issue that I see again and again – and I’m excited to share that yes, it really is quite easy to refinish just the top of a piece of furniture and completely revitalize it!

What can you do with an old dresser?

10 New Uses for Old Dressers

  • Space for a Sink. 1/11. Make a big splash in the bathroom by repurposing an old dresser as a vanity.
  • Dressed for Dinner. 2/11.
  • Drawer Decor. 3/11.
  • Spring Wardrobe. 4/11.
  • Tune In. 5/11.
  • No Monster Under the Bed. 6/11.
  • Open to New Possibilities. 7/11.
  • Approach the Bench. 8/11.

How do you refresh an old dresser?

  1. Prep It. Remove the drawers from the dresser and set them aside.
  2. Prime and Paint. Prime and let dry, then lightly go over the dresser with the fine sandpaper to smooth out any visible brushstrokes.
  3. Replace the Hardware. Unscrew the existing hardware from the drawers.

What is the best furniture to flip?

Solid wood is your best friend when it comes to flipping furniture. It is likely going to give you less problems and it is worth more (usually) when you flip it. This is not to say veneered pieces are bad, there are plenty of antiques that have veneer that are worth a lot.

How do you refinish a veneer top of a dresser?

How to refinish veneer furniture

  1. Wipe down the piece with a damp rag.
  2. Remove all hardware, handles, drawers, doors and legs.
  3. Starting with 100 grit sandpaper, sand the entire piece lightly to remove stain and finish – legs, drawers, sides and around trim.
  4. After the initial sanding, vacuum with a soft brush.

Can you refinish just the top of a table?

Depending on the type of table top and finish you’re working with, you could get away with lightly sanding or repainting the table to give it a new look. We successfully stripped the varnish and stain and refinished the table top over a few days.

How do you get rid of furniture pieces?

You have a few options when it comes to old furniture pick up:

  1. Check with your city and see if they offer free pick up for large items.
  2. Sell or give your old furniture away for free and have the buyer pick it up from your home.
  3. Donate it to a local charity.
  4. Haul it yourself to the dump.

What is the best way to refinish wood furniture?

Start with 120 grit paper to clean off any finish which may remain and to smooth out any bad places in the wood. Then smooth the whole piece down with 220 grit paper. Finishing sanders are particularly good for quickly achieving a uniform smoothness. When sanding by hand, be sure to sand with the grain.

Do I need to remove all stain before restaining?

You don’t need to remove all of the old stain to apply darker stain. But you do need to remove all of the lacquer, varnish or anything that will prevent new stain from absorbing into the wood. Your sanding block will initially glide over the old lacquer before it begins to cut into it and remove it.

How much can you make furniture flipping?

Most furniture flippers will make anywhere between $50 to $500 per month but some of the best have been reported to make over $15,000 per month with this hobby turned business.

Is refinishing furniture profitable?

Almost all your followers have furniture that they want to have refinished. Flipping furniture is surprisingly profitable. In fact, you could make a full-time income no problem if you put the time in to learn the business. Unfortunately, most Furniture Flippers don’t make great money.

How do you update an old wood dresser?

Is it worth it to refinish furniture?

Trying to refinish centuries-old furniture, without using a professional, can damage the furniture and lessen its value. The only exception to this rule is if the item has more personal value to you than what it is worth. However, wood furniture made between 1850 and 1960 are actually ideal candidates for refinishing.

How hard is it to refinish furniture?

Difficulty: Beginner Even with the right protective finish, it will eventually become necessary to refinish a wood furniture piece. Over time and with daily use, the finish can wear away on some areas of wood furniture. The good news is, you can make antique furniture look brand new again with furniture refinishing.

Where is the best place to refinish a chest of drawers?

To get an idea of what your piece will look like refinished, find a protected spot where the original wood is visible, such as the back of a solid-wood drawer front, underneath the top surface of a chest of drawers, or the backside of a leaf in a drop-leaf table.

Where can I get an antique dresser for home?

Antique dressers are so easy to come by! You can find them anywhere like Facebook Marketplace, Craigslist, or your local resale shop. Just make sure to check all the drawers on the dresser before you bring it home to make sure they are in good working order.

Why does antique furniture have to be rebuilt?

Sometimes the drawer is in such bad shape you practically have to rebuild the drawer to fix it. Truly antique furniture has this issue because the pieces don’t have the kind of drawer guides that are used today. Most of the time it’s wood on wood. However, some older drawers are metal on wood. This was the case for mine.

What kind of paint to use on wood drawer?

Start with a high grit, such as 200 and use smooth long strokes. Work up to a 300 grit paper. Dust off the drawer thoroughly and slide it in. This did help my metal to wood drawer, as it gave more space for the sliders.

To get an idea of what your piece will look like refinished, find a protected spot where the original wood is visible, such as the back of a solid-wood drawer front, underneath the top surface of a chest of drawers, or the backside of a leaf in a drop-leaf table.

Is it better to paint or stain an antique dresser?

If the drawers, top, or base of the furniture piece are different woods, the stain will look like it’s a different color on each section and it would be a better choice to paint rather than stain it. In the case of the antique dresser, it was the same solid wood throughout.

When do you not need to refinish antique furniture?

Never Paint or Refinish Furniture With Real (or Sentimental) Value. Another case where you should not refinish wood furniture is if the piece is a valuable antique or a unique designer piece that, although not an antique, nevertheless has a lot of value.

What to look for in a wood dresser?

Hand-cut (top) or machine-cut (bottom) dovetail joints indicate good-quality workmanship and also a piece’s age. Look at the backside of your piece, including the insides and backs of drawers if applicable. Solid wood backing indicates a piece is likely pre-1880s; plywood came into vogue around the turn of the 20th century.

Related Posts