How do I fix my sound bar but wont turn on?
Soundbar will not turn on
- Unplug the soundbar from the wall outlet and check where the two parts of the power cord connect.
- Test the wall outlet.
- Check the power cord connection on the back of the soundbar.
- Plug the soundbar into the wall outlet, and turn it on.
Why will my soundbar not turn on?
If the power light is not lighting up at all, reseat the power cable in the back of the device and where it plugs into the wall. To reseat the cable, unplug the power cord from the device, and plug it back in. Make sure it is securely and tightly connected to the device. Do the same in the wall outlet.
How do I reset my soundbar?
Reset the soundbar by powering it off and then pressing and holding the Play/Pause button until it displays ‘INIT OK’. Power on the soundbar, and then try pairing the soundbar to your TV again.
What does the red light on my speaker mean?
If the POWER indicator is blinking red, the portable speaker is in the protect mode. This may happen if you connect a device that is not compatible with the speaker or due to overheating.
How do I fix my JBL red light?
To solve this problem, press the Power button and keep it pressed until the speaker turns off. It takes around 20 seconds. When the speaker turned off, turn it on again and from now the speaker should function correctly again.
Why does my JBL Clip 3 speaker have a red light?
The JBL Clip 3 red light stays on perhaps because the charging adapter you’re using provides SOME but not ENOUGH charging current. Or, the output power has weakened over time. The speaker requires at least 0.6 amps of charging current at 5 volts (3 watts) from the supply to fully recharge in the specified time.
How do I fix my JBL Clip 3 red light?
Hold down the play/pause button and power button together, it should take anywhere from 15 to 30 seconds for the light to turn off. I looked on youtube and found that it happened to other JBL products but can easily be reset.
Why does my JBL Clip 3 red light stay on?
