How do I connect power to my stereo?

To connect this one to your stereo you just snip off the end and then splice the wires to the power wires in your wiring harness. Most stereos have 2 power wires (one switched and one constant) and 1 ground wire. Splice both power wires to the positive wire of the power supply and the ground wire to the negative.

Can I upgrade my Subaru stereo?

Like most recent Subarus, this Outback’s factory stereo systems are reasonably okay, but that’s about all. If you’re ready to improve your car’s audio performance, you really should install an aftermarket receiver and speakers.

What Are Key 1 and Key 2 wires?

These radios’ SWC wires are often identified as KEY 1 and KEY 2, or SW 1 and SW 2. This enables you to connect your Panasonic, Android radio, or another radio brand to our PAC interface to retain steering wheel controls with the radio without having to modify our 3.5mm connector.

What sound system does Subaru use?

Harman Kardon® Audio
Harman Kardon® Audio Subaru offers an extensive line of premium audio systems featuring Harman Kardon speakers and amplification. Each system features a dedicated amplifier and an array of premium speakers around the cabin to create stunning clarity. Harman Kardon automotive audio will complete the driving sensation.

Are Sony and Pioneer wiring harnesses the same?

Sony Harness colors are the same as Pioneer correct? All you would have to do is cut the Sony harness off leaving about 2-3 inches of the wire (From the Sony harness) on each (Factory wire).

Where do I connect key 1 and key 2 wires?

Key 1 and 2 are used for steering wheel control as well as some other applications like radios. You need to connect the key 1 or key 2 with the original steering wheel control wire. The button light control wire is referred to as “Illum” wire.